|
| |
Fabtech Kawasaki Teryx Lift Kit
& Bumpers
In continuing
the expansion of our UTV applications, Fabtech is proud to introduce the
Long Travel suspension lift kit for the Kawasaki Teryx. Designed as a
complete system, including front and rear upper and lower control arms,
extended length tie rods, stainless braided brake lines, heavy duty
replacement axle shafts and the heart of the system, Dirt Logic 2.0
Coilovers with remote reservoirs.
The Dirt Logic
2.0 Coilovers are engineered and built specifically for this Long Travel
Teryx lift kit. Extensive ride work has been performed to dial in proper
shock valving assuring slow speed comfort for the trails and around camp
with aggressive high speed damping for open terrain.
All components
included in this system are finished in a neutral gunmetal gray
powdercoat.
|
Features & Benefits:
-
1.25" OD x .120
wall Chromoly tubular control arms w/dimple die gusset plates for
additional strength
-
Front upper arms utilize
3/4" Teflon lined heim ends
-
Heavy Duty 4340 heat
treated axle shafts
-
Steering rod extensions
with 1/2" heim ends
accommodate the added track width
-
Dirt Logic 2.0
Adjustable Coilover Reservoir Shocks
-
Includes rear Brake
Lines
-
Track width is 5"
wider per side, 2" longer front and rear, and 3" taller
compared to stock.
Installation & Tech:
-
4 hours
-
Welding - No
-
Cutting - Yes, front
fender trimming
-
Drilling required - Yes,
upper/lower ball joit
Tire & Wheel size:
Stock or Aftermarket:
Front 26x9R12 on 12x7 inch wheels w/4+3 offset
Rear- 26x12R12* on 12x7 inch wheels w/4+3 offset |
Click part
numbers to see lowest price in cart!
| FREE
UPS GROUND SHIPPING TO CONTINENTAL USA FOR LONG TRAVEL SUSPENSION SYSTEM
ONLY. |
| 2008
Kawasaki Teryx Lift Kit |
Part
# |
Price |
| 5"
Long
Travel Suspension System |
FTR18 |
$4,992 |
| Stock
Replacement Shocks |
Part
# |
Price |
| Dirt
Logic 2.0 Long Travel Shock w/Resi, Front Pair |
FTR60163 |
$1,275 |
| Dirt Logic 2.0
Long Travel Shock w/Resi, Rear Pair |
FTR60165 |
$1,275 |
| 2008
Kawasaki Teryx Accessories |
Part
# |
Price |
| Billet Resi Clamp |
FTR10089 |
$95.00 |
| Front Bumper,
Black |
FTR10087BK |
$449.95 |
| Rear
Bumper, Black |
FTR10088BK |
$349.95 |
| Tailgate Latch
Kit, Pair, with Logo |
FTR10049 |
$164.95 |
| Tailgate Latch
Kit, Pair, without Logo |
FTR10050 |
$164.95 |
Click photos to enlarge.
| |

5" Long Travel
|

Dirt Logic
2.0 |
The
Dirt Logic 2.0 Coilovers directly replace the front and rear shocks on
Rhino’s with stock suspension or with Fabtech’s Long Travel system.
Extensive ride work has resulted in a supple ride at low speeds for
cruising around camp with superior dampening capacity at high speeds for
those aggressive trail rides.
• 2” OD Threaded Nickel Plated Steel Body
• 2.25” OD Steel Reservoir
• Large 7/8” OD Induction Hardened Chrome Piston Rod
• Preset valving for optimum ride quality at all speeds
• Adjustable Coilover construction
• 6061 T6 Polished and Anodized Billet Components
• Aluminum Rod ends with Teflon Bearings
• Closed cell foam Bump Stop (not pictured)
• Includes Reservoir mounting system
Long Travel Shock Features -6 Stainless Steel O-Ring Resi Hose. Spring Rate: Front- 200LB/in Rear- 300LB/in.
|

Teryx front bumper

Teryx rear bumper
|
Fabtech introduces a new
addition to the already popular UTV bumpers. This 1.5" tubular
front bumper with skid plate and prerunner style rear bumper adds the
rugged protection rerquired. Our front bumper comes with a 1.5"
over rider hoop and provides mounting of up to four auxiliary lights.
Due to the placement of the rear bumper and frame tubes, the tilt design
of the bed will not be functional. Each bumper bolts directly to
the frame for a hassle-free installation. Both bumpers come powdercoated
black and the front bumper includes a 3/16" aluminum line grained
Skid Plate.
Installation & Tech:
|

Tailgate Latch Kit w/Logo

Tailgate Latch Kit |
Machined
and high polished our tailgate latches will add the finishing touch to
the exterior of any Rhino. The attention to detail in the machining
process includes finger grips and horizontally cut bars. Sold in pairs
with Fabtech logo or plain. |
Back to Top
|