1967-72 4WD CHEVY/GMC SUSPENSION LIFT KITS

2.5" allows 34x12.50
4" allows 36x12.50
6" allows 38x12.50
8" allows 40x12.50

Skyjacker's SOFTRIDE technology produces the highest quality of leaf spring systems the industry has ever known manufactured with tapered leaves to yield a lower spring rate and better travel, Teflon wear pads to help reduce interleaf friction, a "bolt" style clip to reduce leaf friction and shotpeening to compress the steel and increase its tensile strength.

All lift kits listed below contain front leaf springs, bushings and u-bolts. 6" & 8" lifts also include brake line extensions. Choose a Kit with rear blocks or System with rear leaf springs. Steering arm recommended for lifts 4" and higher and sold separately

Shocks sold separately. Sway bar lowering kit may be needed for 6" & 8" lifts.

NOTE: Rear leaf springs do not fit 1967-68 Pickup, Blazer Jimmy

2" allows 32x10.50
4" allows 33x12.50
6" allows 35x12.50

69-72 Chevy/GMC lift kits by Tuff Country include choice of front EZ-Ride or Heavy Duty leaf springs with bushings and new eye bolts, all hardware. Choose rear block kit or 52" rear leaf springs.  4" & 6" lift kits include steering arm

Shocks sold separately.

The Rough Country lift kit includes leaf springs that have been redesigned to incorporate "luxury ride" technology. Each double tapered leaf with Teflon pads was specifically engineered for each individual vehicle to provide the best ride possible.

Steering arm sold separately. Not all vehicles will need this option.  

4" allows 35x12.50

4" allows 34"
6" allows 35"
8" allows 36"

These lifts include Superlift Standard springs that yield a ride firmer than stock springs and should be chosen for moderate to heavy-duty use when a winch, big block or diesel power plant is present, or if your rig is used for hauling or towing. 

All lifts include front leaf springs, bushings, u-bolts, brake line brackets. Kit uses rear blocks and/or add-a-leaf. Systems use either 52" or 56" rear leaf springs. 

Shocks sold separately.