SKYJACKER SUSPENSION LIFT KITS

2.5" & 3.5" allows305/75/16's

Standard 4" & 5" allows 35x12.50x16, 8" wheels w/4.5" BS

Long Arm 4" & 5" allows 315/70/17
Long arm 6" & 7" allows 355/70/17

on select lift kits

Skyjacker Lift Kits for 2007-12 Jeep Wrangler JK, Unlimited & Unlimited Rubicon

The 2.5" & 3.5" lift kits include performance replacement Softride front and rear coils springs which provide a stable, comfortable ride. New Polymer front bump stops and rear bump stops relocation brackets, rear track bar relocation bracket for the rear axle and all necessary mounting hardware completes the kit. Also available with lower control arms and in Skyjacker's Classic Red.

The 4" & 5" lift kits feature Softride front and rear coil springs along with front and rear track bar brackets. The kit also includes front and rear adjustable lower control arms with greaseable bushings and brake line brackets.. Lower front control arms are formed from 1/4" wall DOM tubing. Front and rear bump stop spacers and all necessary hardware complete the kit. Pitman arm recommended & sold separately. Also available without control arms and in Skyjacker Classic Red.

Sport Value Flex package differs from the Value Flex in that the lower control arms are not adjustable. The Sport Value Flex package includes 4 Skyjacker Hydro shocks with red boots. Pitman arm recommended & sold separately.

Long Arm Series lift kits include upper and lower Value Flex control arms which are tubular. The front lower arms are arched and relocated inside the frame for maximum ground clearance and turning radius. These arms are 40% longer than factory spec for greatly improved articulation.  A pitman arm is recommended. 

Track Bar Bracket Brace Series - This brace will strengthen the factory track bar brackets. The mounting hole is slotted, and will fit Skyjacker Wrangler JK kits and most other manufactures if their kit includes a track bar relocation bracket mounted on the axle.

With the Value Flex Series, Skyjacker has taken the lift and the look from their Flex Series systems and packed it into these great Value Flex Kits. This gives you all the necessary items for the ultimate articulation at an economical price. Served up with lower control arms fitted with Skyjacker¹s massive 1.25" Teflon®/Kevlar® lined, self-lubricating rod ends at the axle. Soaking up the energy at the frame are greaseable polyurethane bushing ends. Add in some serious steering protection and poly tie rod boots for when you're Tweaked to the Max! The 4" and 5" Value Flex kits recommend a front & rear driveshaft replacement or rear upper cam bolts. A pitman arm is recommended for all lifts over 3". 

NOTE: Exhaust modification will be required for 2012 models.