2006-08 4WD DODGE RAM 1500 SUSPENSION LIFT KITS

4" allows 35 x 12.50
6" allows 36 x 12.50
17 x 9 w/ 4.5" BS

The Zone Dodge 4" & 6" Suspension System is centered around two main crossmembers that are locked together with a substantial differential skid plate. CNC machined steering knuckles correct steering geometry while reducing installation time. Strut top spacers are used to maintain factory ride and no strut disassembly is required. Includes differential skid plate. The block and ubolt kit combined with the strut spacer makes this system one of the easiest to install on the market.

Notes: TRX models require removal of lower skid plate. Not recommended for AWD vehicles

.FREE shipping for complete kits to Continental US

6" lift requires 18" wheels or larger.

35/12.50R18 tires, 18x9 wheels with 4.5" BS
OR
35/12.50R20 tires, 20x9 wheels with 4.5" BS

2006-08 4wd Dodge 1500 Lift Kits by Fabtech

The 6" Basic Systems include steel coilover shock spacers that utilize the stock front coilover shocks for a factory like ride. This system uses our proven IFS technology with extended length ductile iron steering knuckles and arched crossmembers for exceptional suspension ground clearance with a 1/4" thick differential skid plate, impact struts, heavy duty tie rods, and rear add-a-leafs.

The 6" Performance Systems feature Dirt Logic 2.5 adjustable coilover shocks providing superior offroad dampening capacity with a good highway ride.

FREE shipping for complete kits to Continental US

4" allows 35x12.50/18, 5" BS
6" allows 37x12.50/18, 5" BS
18" or larger wheels must be used

Skyjacker 4" and 6" Lift Kits for the Dodge 1500 includes front strut spacers, front steering knuckles, front & rear cross members, differential relocation brackets, differential skid plate, front driveshaft spacer, front sway bar end links, front brake line relocation brackets and a rear block kit. 6" also available with rear leaf springs.

Shocks sold separately.

2.5" allows 33x12.50 factory BS
4" allows 35x12.50 R20 with 5.5" BS
6" allows 37x12.50 R20 with 5.5" BS

Rough Country's 2.5" lift kit includes front strut extensions, stud extensions, 1.5" rear blocks and u-bolts, and rear Nitro shocks. Note: Under hard acceleration in 4x4 high, unlifted Dodge Ram’s often have a front end vibration or shutter. This vibration or shutter exists due to the design of the motor and differential mounts and is inherent in the vehicle. This vibration or shutter may be more pronounced after a leveling kit is installed due to additional torque from modified driveshaft angles. This does not indicate a problem, but should be a consideration prior to installation.

The 4" and 6" lift kits include new lifted knuckles, front & rear crossmembers, driver and passenger side differential brackets, driveshaft spacer, sway-bar links, skid plate and strut spacers with a rear block kit and rear Performance 2.2 series shocks. Not recommended for AWD vehicles.

Shocks boots sold separately.

Enlarge

Superlift 4" & 6" lift kits for the 06-08 4WD Dodge Ram 1500. Front lift choice of new strut towers (no strut disassembly required), or replacement Superide Select SS series gas monotube strut bodies by Bilstein. Replacement knuckles yield best possible alignment specs. Front track width is not increased and factory turning radius is retained. Front lower control arm crossmembers laser cut from 3/16” material. Belly pan, constructed of 1/4” material, connects crossmembers and protects differential. Retains front anti-sway bar link extensions factory “service for life” links.

Dodge TRX Model - Both Superlift’s 4” and 6” lift kits will fit Dodge’s TRX. Some additional Superlift components are needed if using the strut spacer lift version. Note that the TRX factory ride height is approximately 1” taller than the standard 1500, so you will gain 1” less lift than stated.

4” Lift clears up to 35 x 12.50 tires on 18” wheels with a maximum backspacing of 5”, or 35 x 12.50 tires on 20” wheels with a maximum backspacing of 5.5”.

6” Lift clears up to 37 x 12.50 tires on 18” wheels with a maximum backspacing of 5”, or 37 x 12.50 tires on 20” wheels with a maximum backspacing of 5.5”.