1980-96 4WD FORD BRONCO SUSPENSION LIFT KITS

2.5" allows 32x11.50x15
4" allows 33x12.50x15
6" allows 35x12.50x15

Rough Country's 2.5" lift kit for the 80-96 4WD Ford Bronco includes front coils, all drop bracketry and a rear block kit.

The 4"  & 6" lift kits include front coils, all drop bracketry, rear block kit or leaf springs and power steering pitman arm.  Free single steering stabilizer included.

Sway bar drop brackets are recommended for vehicles with front sway bars. Extended brake lines strongly recommended for 4" lift; required for 6" lift.  

Shock boots not included.

2.5" lift allows 32x10.50 tires
4" lift allows 33x12.50 tires
6" lift allows 36x12.50

81-96 4WD Ford Bronco Tuff Country Lift Kits

Standard lift kits include coil springs, axle pivot brackets (w/cam bolts), radius arm drop brackets, front sway bar drop brackets, front & rear brake lien extensions, and a rear add-a-leaf and/or block kit. 4" & 6" lift kits include a pitman arm.

Performance lift kits include coil springs, axle pivot brackets (w/cam bolts), extended radius arms (15" longer than stock), radius arm brackets, front sway bar drop brackets, front & rear brake line extensions, and a rear add-a-leaf and/or block kit. Gives better articulation, more ground clearance & sharper turning radius. 4" & 6" lift kits include a pitman arm.

Shocks required and sold separately.

2" allows 32" tires
4" allows 33" tires
6" allows 35" tires"
8" allows 37" tires

FREE SHIPPING on
select kits & systems

Skyjacker's  4" & 6" Class I lift kits for the Ford Bronco include coils and all drop bracketry with either rear blocks or leaf springs. 

Class I 8" lifts include front coils, all drop bracketry, rear blocks or leaf springs, pitman arm, stainless steel braided brake lines and frame support bar.

The Class II 4" & 6" lift kits include a power steering pitman arm & replacement tubular offset radius arms extended 15" longer than stock offering up to 30% more wheel articulation and less frame fatigue than using radius drop brackets. Center hinge brackets are both stylish and more rugged than stock or standard applications.

Longer brake lines recommended for 4" lift kits and required for over 6" of lift.

Kits use rear blocks and/or add-a-leafs and Systems use rear leaf springs. For the 4" systems with rear leaf springs, the factory block is removed.

4" allows 33" tires
6" allows 35" tires

Superlift lift kits for the 80-96 Ford Bronco. Standard kits utilize longer radius arm brackets that replace the stock pieces. The Superunner series replacement radius arms are considerably longer than stock offering caster correction and additional benefits. 

Kits come with rear blocks. Systems come with rear leaf springs.

Using the Superunner Steering Linkage in addition to the pitman arm lowers the pivot point of the tie rods close to the axle halves’ pivot point and allows the use of new tie rods that are proportional in length to the axle halves. The result is steering linkage that is in almost perfect phase with the suspension, yielding optimum steering response