2" allows 33x11.50
6" allows 35x12.50, 16x8 wheel with 4.5" BS
The 6" lift kit by Zone features massive one piece crossmembers designed to work perfectly with the CNC machined steering knuckles to maintain factory geometry. This system is a full 6" front, 5" rear system with the torsion bars at stock setting. No "cranking" required to clear those 35's. Custom valved Zone shocks are included for on road handling as well as off road performance. Complete bolt-on installation.
Zone's 2" lift for both the front and rear of your Ford F150. The front is lifted with Zone Offroad torsion bar keys made in the USA and are 100% resonant frequency tested to ensure a solid casting. Once tested the keys are CNC machined to ensure the proper amount of lift for your vehicle. These keys are designed lift the front of your truck 2 inches. The rear is lifted with a 2" block and U-bolt kit.
Zone Offroad offers this 4" Combo Kit with a 2" body lift plus 2" torsion bar keys to allow for 33x12.50 tires at a cost that is drastically less than a full suspension system. Combine the keys with the body lift and you have a simple to install 4" system at a price you can afford!
|1997-03 4WD Ford F150 including Super Crew Lift Kits||Part #||Pricing|
|6" lift kit with white Hydro shocks - FREE shipping||F14||$1,295.95|
|6" lift kit with black Nitro shocks - FREE shipping||F14N||$1,317.03|
|2" lift kit||ZONF1212||$159.95|
|4" Combo Kit||ZONF1400||$279.95|
|Alignment Cam Kit||ZONF8001||$57.95|
|Rear Driveshaft Spacer||ZONF5601||$69.95|
Fabtech 6" Performance short arm lift kit for the 97-03 4WD F150 uses knuckle technology with high arch lower crossmembers to gain the proper altitude. One of the main design objectives of this system was to achieve a true 6" over stock ride height. Fabtech felt that adjusting the torsion bars up was not an option. They placed the bolt hole location a full 6" lower than stock and designed the rest of the system around this.
This true 6" ride height increase allows the use of
FREE shipping for complete kits to Continental US
|4WD Ford F150 Automatic transmission- Shocks included||Part #||Price|
|6" 97-03 4WD F150, Supercrew, Supercab
6" 2004 4WD F150 Heritage
|Single Steering Stabilizer||FTS8003||$80.79|
6" allows 35x12.50 tires with 4.5" BS
1997-03 Ford F150; 2004 Ford F150 Heritage; 2001-03 Ford Supercrew
Skyjacker 6" Lift Kit is a direct bolt-in setup with CNC machined steering knuckles, with or without 2-piece 4-point skid plate, heavy duty crossmembers, bracketry for front upper differential mounts, bracketry for torsion bar crossmember, replacement longer front sway bar end links, front & rear brake line relocation brackets. No drive shaft replacement or modifications.
NOTE: Regular cab, short bed models are equipped with a factory tapered 2" block. For correct driveline angle, these models will need to order a flat 2" block part RBF220.
Kits use rear blocks. Systems use rear leaf springs.
|1997-03 F150; 2004 F150 Heritage; 2001-03 Supercrew - Shocks sold separately||Kit||Price||System||Price|
|6" lift kit with skid plate||F9701K||$1,911.62||F9701KS||$2,489.48|
|6" lift kit without skid plate||F9701K-NSP||$1,772.37||F9701KS-NSP||$2,350.22|
|Flat 2" blocks for regular cab, short bed models||RBF220||$60.33|
The Rough Country 4"-5" lift kit for the 97-03 4WD Ford F150 truck includes CNC machined front steering knuckles, front skid plate, differential skid plate, front & rear 3-piece 1/4" thick steel crossmembers, sway bar links, bump stop brackets, torsion bar brackets, rear block kit and shocks. Shock boots not included. No drivetrain or exhaust modifications required.
Fits 35x12.50 or metric equivalent tires, 4-1/2" backspacing with no rubbing or trimming of the fender well. Will not work with factory wheels.
|1997-03 4WD Ford F150 lift kits - Shocks included||Hydro Shocks||Price||Nitro Shocks||Price|
|4"-5" lift kit with 3" rear block kit||477S||$999.95||477N||$1,024.95|
|4"-5" lift kit with 4" rear block kit||476S||$999.95||476N||$1,024.95|
RCD 4"-5" lift kits for the 97-03 4WD Ford F150 truck include CNC machined cast iron steering knuckles, heavy duty 2-piece lower sub-frame assembly and stainless steel "Twin-Link" anti-compression struts, CNC machined, zinc plated billet steel sway bar links with over-sized urethane bushings and Bilstein mono-tube shocks. No driveshaft modifications necessary.
To clear 35x12.50 tires requires wheels with a maximum of 4-5/8" backspacing
|4WD Ford F150 Lift Kits - Shocks included||Part #||Price|
|4-5" lift kit 97-03 F150 w/4R70W Trans. - $65 Ground shipping||10-42097||$1,609|
|5" lift kit 97-03 F150 w/E40D Trans. - $65 Ground shipping||10-42098||$1,857|
|Superlift's 4"-5" lift kit for the 97-03 4WD Ford F150 truck includes nodular iron steering knuckles, centerlink with stabilizing link, 1/4" thick steel load bearing bracketry, full width differential / control arm crossmember and kicker braces, 2-piece front skid plate, front brake hoses and either Superide or Bilstein shocks. No cutting or welding for installation.
Allows 35x12.50 tires on new rims with 4.5" BS
|1997-03 4WD Ford F150 -- Shocks included||Superide Shocks||Price||Bilstein Shocks||Price|
|4"-5" lift kit All except 5.4L shortbed standard cab||K246||$1,949||K246B||$2,175|
|4"-5" lift kit 5.4L Standard cab, shortbed only||K248||$2,075||K248B||$2,301|
97-03 Ford F150 4.5" Tuff Country Lift Kit Spindle / Sub-frame design makes for a simple, bolt-on installation. One piece sub-frame increases strength and eliminates squeaks and rattles from front end. Also includes torsion bar drop brackets, front bump stop relocation brackets and differential drop brackets to keep the proper alignment and geometry. 5.5" cast iron lift blocks are used lift the rear end. These new blocks replace the factory blocks.
2" lift allows 33x12.50
|1997-03 4WD Ford F150 - Shocks sold separately||Part #||Price|
|2" lift kit uses front replacement torsion bar keys and rear lift blocks. The torsion bar keys reindex the factory F150 torsion bars which lifts the truck without "cranking up" the factory torsion bars. Rear cast iron lift blocks replace factory blocks to give an additional 2" of lift in the rear.||22916||$208.43|
|4.5" lift kit. Fits 4.2L, 4.6L & 5.4L engines.||24950||$1,373.71|
Premium Lift Systems offer an affordable lift solution. Combining Performance Accessories' body lift kit, leveling kit and gap guards, Premium Lift Systems are the most economical way to raise your vehicle 5" allowing a 35" tire. Premium quality and appearance without the premium price tag!
All PLS systems come with high-grade components including nylon-reinforced body blocks, heavy-duty steel bumper brackets, a CNC machined steering adaptor and urethane Gap Guards.
|4WD F150||Part #||Price|
|97-02 F150, F250 New Body Style 5" Combo Kit||PLS701||$394.42|
|00-02 F150 Supercrew, Reg. Cab 5" Combo Kit||PLS704||$375.42|
Lift kits for the following years:
97, 98, 99, 00, 01, 02, 03, 04
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Lift kits for the following vehicles:
Ford F150, Heritage, 4WD, 4x4