Owner's Gallery
1966-98 Ford F250, F350 Pickup |
1995 F350 with
8" Suspension Lift,
39x18 Mickey Thompsons wrapped around 16.5x12 Eagle Alloys,
7.3 ltr diesel with 140 hp chip, cold air intake, dual 6" stacks, 456 gears with lockers front and rear. Collin Wollfe, Powhatan, VA
|
1980 body on a 1979 F350 frame with 6" suspension lift and 3" body lift. 44" Ground Hawg tires on 16.5X10 wheels. It has a 466 professional built engine with 650hp.L&L ladder bars and L&L product fender exit headers with 3- 1/2" pipes. 3000 stall converter and shift kit in the tranny. Quad shocks in the front on each side with dual in the rear. Colby Haines, Beech Creek, PA |
1967 F350 with home-made 6" lift, 2.5" body lift, 46X19.50-16.5 Mickey Thompson Baja Claws, 16.5x12 White Steel wheels, 1971 460 bored .030 over, 4-speed, 4:56 gears. Travis Gillette, Winnabow, NC.
|
1977 F250 with 10" lift, 17/40/16.5 Ground Hawgs, built 460. Ricky Garrett, Lakeland, FL
|
1977 Ford F-150 custom high boy with no lift yet on 35x12.50R15 BFG mud terrains. It's got a 429 big block pushing 467hp at the rear wheels and over 500 lbs of torque up against a B&M C6 transmisson with 3.73 gears. It's a great truck and now that the drivetrain's done, the body work is next. Matt Deleon, San Antonio, TX
|
1987 Ford F250 with 6" Skyjacker suspension lift kit, 38x15.50Rx16 Mickey Thompson Baja Claws, 16x10 American Racing Outlaw II, custom roll bar with 5 KC Daylighters. Justin Demos, Alexander, NC
|
1995 Ford F250 with 4" Superlift suspension lift kit, 16x10 Eagle Alloy wheels, 35x12.50 Mastercraft Courser MT tires. Andrew Loeffelman, St. Louis, MO
|
1976 F-250 with 4" suspension lift kit, 35x12.50x16.5 Boggers on ultra wheels. Protech cab guard and tool box. It's got a 360 motor with an Edelbrock 600 carb. I want to put a set of 38x12.50x16.5 Super Swamper TSL's on it with a 6" suspension lift. I plan on building a 390 to drop in by this time next year. Everything takes money, so it's a little bit at a time. Tracey Heston
|
1969 Ford F250 with a 2" body lift (no suspension) and 35x12.50x16.5 General Grabber MT's. 460 power plant, 4speed trans, and 4.56 gears. Future plans of a 4" suspension and 38" tires. One tough truck. Ryan Ginsbach, Hankinson, ND
|
1978 Ford F250 Custom with a 4" suspension lift kit, 38.5" Ground Hawgs, 16.5" wheels. The engine is a 350 built to a 406 cubic inch; long tube headers & dual 3" exhaust. Warn front bumper with a Warn winch. Ford 9" rear axle and front Dana 44. Fully custom interior. Alex Marcucci, 16 years of age. Nevada City, CA
|
69 F250 with Skyjacker 4" suspension lift kit, 38" Ground Hawgs, David Jensen, Canby, OR
|
1996 F250 with 6" Skyjacker suspension lift kit running 36/12.50-16 Super Swampers on 16x8 stock rims. "King of the Hill," Rose City, MI
|
91 F250 show stopper. No, we don't sell this lift, but thought you might enjoy looking! Custom everything--14" springs, Bart Monster wheels on 19.5 boggers, turned by 5:13 gears & lots more. Thanks to Brad Muncy, Wilmington, NC for "Djinn"
|
96 F250 with 6" Skyjacker suspension lift kit, 36" Gumbo Mudder radials w/ 9.75 chrome mods. This family project took 2 years to complete. Started w/ a 96 bare frame & built the crew cab; 78 Dana 60 front axle w/ 410 gears; 93 Ford 10.25 rear axle & much more. Matthew Scherrens, Grandville, MI
|
