1995-03 4WD Chevy S10, GMC S15 Pickup F.I.T. 6" lift kit, Superide shocks
Product No: K776 SL
Availability: In stock
** With single exhaust, a new, reformed section of exhaust crossover pipe is required to clear front driveshaft.
** Special puller tool is recommended to load / unload torsion bars.
** Minor cutting and / or welding required
** Not compatible with ZR2 and Highrider.
The Superlift 6" F.I.T. (Frame Integrated Technology) Series lift kit for the Chevy S10, GMC S15 Pickup raises lifted vehicle performance to the next level. Front lift is achieved with laser-cut bracketry that lowers the factory upper and lower control arms. The front differential is protected with a full-width bellypan to increase overall system rigidity. This mates to the lower control arm crossmembers with an interlocking dovetail fit and is secured with countersunk bolts.
The factory centerlink is relocated to keep the tie rods in phase with the lower control arms for correct steering linkage geometry. A greasable stabilizing link regulates the centerlink movement thereby reducing the load and stress transmitted to the pitman arm and idler arm. The torsion bar crossmember is lowered for proper alignment with the lower control arms.
The factory springs are relocated from below the axle to the top of the axle to accomplish rear lift. Four Superide shocks are also included. Superlift incorporated their no-compromise approach in the design of this system to focus on proper steering geometry, suspension travel control and frame rigidity.