2003-6/30/07 4WD Dodge Ram 2500, 3500 4.5" Long Arm spacer lift kit, Nitro shocks
Product No: 34213KN TC
Availability: In stock
Will not fit Power Wagon, Off-Roadster models. Order carrier bearing drop kit 20824 for vehicles with 2-piece rear driveshaft.
The pitman arm included in this lift kit works on 2003-08 models with the factory steering box. If your steering box has been upgraded, this pitman arm will not fit and you should order the 2009 model pitman arm sold separately. To determine this, measure the sector shaft spline. The 2003-08 model will measure 1-1/4". The upgrade will measure 1-1/2".
For the best possible ride and more articulation, the Tuff Country Long Arm lift will do the job by replacing the factory control arms with the longer arms to create less of an angle . This results in a much softer ride, dramatic handling improvements (reduces bump steer significantly) and better articulation. Both upper & lower arms use greasable, rebuildable flex joints to reduce or eliminate binding of the front suspension. Also included are coil spring tower brackets that mount above your factory coil springs for 4.5" of front lift. The advantage of the coil tower brackets is maintaining the factory ride while being securely bolted in aboe the factory springs. Also included are rear cast iron blocks, extended upper & lower control arms with poly bushings to maintain proper alignment, pitman arm, and a track bar relocating bracket. This is an easy bolt-on installation. Four SX8000 Nitro shocks included. Shock boots are sold separately.
Required and/or Related Items