2008 4WD Dodge Ram 2500, 3500, Mega Cab 5" X-Series lift kit, Nitro shocks

Product No: 393.24 HK

Availability: In stock


Important Notes

Will not fit Power Wagon. On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take-off vibration. Depending on the severity, this can be corrected with shimming down the carrier bearing with part 1110.

The pitman arm included in this lift kit works on 2003-08 models with the factory steering box. If your steering box has been upgraded, this pitman arm will not fit and you should order the 2009 model pitman arm sold separately. To determine this, measure the sector shaft spline. The 2003-08 model will measure 1-1/4". The upgrade will measure 1-1/2".

Quick Overview

The X Series 5" lift kit by Rough Country for the Dodge Ram 2500, 3500 and Mega Cab includes tubular upper & lower adjustable control arms, lifted front coils, pitman arm, sway bar brackets, track bar relocation bracket, a 4" fabricated rear block kit, emergency brake relocation bracket and 4 RC Nitro shocks. Shock boots sold separately. The adjustable control arms allow for proper alignment. They include OEM style rubber bushings and are greasable. The track bar bracket keeps the front axle properly centered. Fabricated blocks are stronger than cast and offer a longer lifespan.

Product Attachments

View File393.24, 394.24, 346.24, 347.24 Instructions    Size: (347.57 KB)

Required and/or Related Items

Rough Country 393.24 Dodge Ram 2500, 3500, Mega Cab X-Series lift kit

Be the first to review this product

    • Make: Dodge
    • Model: 2500
    • Vehicle: 2008 Dodge 2500, Mega Cab 5" X-Series lift kit, Nitro shocks
    • 2or4: 4WD
    • Tire Size: 37x12.50 on 17"-20" wheels
    • Upsell: 87323.20 HK, 87495.20 HK, 1110 HK, 6615 HK


Rough Country lift kit fits the following models:
2008 Ram Mega Cab
2008 Ram 2500
2008 Ram 3500

Please wait...