2008 4WD Dodge Ram 2500, 3500, Mega Cab 5" lift kit, Nitro shocks
Product No: 393.23 HK
Availability: In stock
Will not fit Power Wagon. On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take-off vibration. Depending on the severity, this can be corrected with shimming down the carrier bearing with part 1110.
The pitman arm included in this lift kit works on 2003-08 models with the factory steering box. If your steering box has been upgraded, this pitman arm will not fit and you should order the 2009 model pitman arm sold separately. To determine this, measure the sector shaft spline. The 2003-08 model will measure 1-1/4". The upgrade will measure 1-1/2".
The 5" lift kit by Rough Country for the Dodge Ram 2500, 3500 and Mega Cab includes front coil springs, pitman arm, sway bar brackets, track bar relocation bracket, a 4" fabricated rear block kit, emergency brake relocation bracket and 4 RC Nitro shocks. Shock boots sold separately. This design mounts your stock control arms at a reduced angle using the control arm drop brackets to provide a better ride and better caster angle for increased driveability. The included fabricated rear blocks are stronger than cast blocks and offer a longer lifespan.
Required and/or Related Items