2008-16 4WD Ford F250, F350 Super Duty 2.5" lift kit, Performance shocks

$902.33
Product No
K2376-FT
FREE SHIPPING Lower 48 States

Important Notes

Diesel models only
Does NOT fit Gas or Dually models

Quick Overview

In the market to lift your Superduty but dont need a lot of lift? Fabtech has the answer with this 100% complete 2.5" lift system. This kit will easily allow a 35" tall tire. Fabtech’s coil springs retain the factory load-carrying capacity while increasing suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when off roading in rugged terrain. Sway bar drop brackets are included in Fabtech’s lift kit to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated to eliminate the possibility of overstretching the. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Fabtech includes 2 degree adjustable alignment ball joint inserts to keep the factory alignment specs. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. The kit is designed to level the truck but for owners that want the factory nose-down appearance, Fabtech offers an optional 4" rear block kit (FTS22214). The 4" blocks replace the factory 2.5" blocks and will provide an additional 1.5" of lift over stock.

Kit Components
Front Coil Springs
Heavy Duty Adjustable Track Bar
Sway Bar Drop Brackets
Brakeline Extension Brackets
Set of 4 Performance Series Shocks

Kit Features
Provides a level stance - to keep factory rake us FTS22214 rear blocks
Factory load bearing front coils
Alignment bushings for factory alignment specs
Coils rated for Diesel engines only
35/12.50R17 Wheel Size – 17×9 w/ 4 3/4in BS w/minor trimming
35/12.50R18 Wheel Size – 18×9.5 w/ 4 3/4in BS w/minor trimming
35/12.50R20 Wheel Size – 20×9 w/ 5in BS w/minor trimming


View kit installation instructions

Required and/or Related Items

Fabtech 4" lift kit fits following models:
2008 F250 Super Duty
2009 F250 Super Duty
2010 F250 Super Duty
2011 F250 Super Duty
2012 F250 Super Duty
2013 F250 Super Duty
2014 F250 Super Duty
2015 F250 Super Duty
2016 F250 Super Duty

2008 F350 Super Duty
2009 F350 Super Duty
2010 F350 Super Duty
2011 F350 Super Duty
2012 F350 Super Duty
2013 F350 Super Duty
2014 F350 Super Duty
2015 F350 Super Duty
2016 F350 Super Duty

We found other products you might like!
© 2024 Rocky Mountain Suspension. All Rights Reserved.  |  Privacy Policy.  |  Website by Bennett Web Group