1984-93 Cherokee XJ, Wagoneer XJ 4" lift kit, Superide shocks
Product No: K825 SL
Availability: In stock
If equipped with light duty double offset joint front driveshaft (rubber boot at transfer case end), it must be replaced with Spicer type as used on a 4.0 liter in-line 6 cylinder models. Some vehicles with 4" of lift require the use of a fixed yoke kit (5080 for NP231 transfer case) to reduce drive line vibration. A small percentage of Jeeps with 4" of lift (except Rubicon models) will require a Slip Yoke Eliminator kit to reduce driveshaft angle / driveline vibration. This cannot be determined until the lift is installed and the Jeep road tested. A SYE is required with lifts over 4" (except Rubicon).
The 4" lift kit by Superlift includes front coil springs, upper & lower links, transfer case drop bracket & shifter plate, pitman arm, front sway bar bracket, adjustable track bar, bump stop and 4 Superide shocks. Shock boots sold separately.
Required and/or Related Items