1993-98 Jeep Grand Cherokee ZJ 4" lift kit, Hydro shocks

Product No: J16 ZN

Availability: In stock

$639.95
free shipping

Important Notes

Measure front driveshaft prior to installation. Over 24.5" does not require modification. 20"-24" may require a change to spicer type joint if vibration occures. If less than 20", a spicer type joint is required and vibration may persist. If equipped with a CV stype front driveshaft mount at the pinion, then a new spicer type u-joint is required to eliminate vibration. Vehicles with V8 may not achieve stated lift height. Front 3/4" coil spacer is a common addition to accommodate the additional engine weight.

Quick Overview

This 4" lift kit by Zone Offroad provides dramatic improvement in both ground clearance and wheel travel. Massive lower control arms are greasable and made from 1-3/4" x 1/4" wall DOM tubing to correct front alignment and improve suspension control. Front and rear coil spring, transfer case drop, rear pinion cams that rotate the rear pinion, front extended sway bar links with urethane bushings, rear track bar brackets to center the axle, 3" bump stop extensions and 4 Nitro shocks specifically valved for this application are also included.

J16_ZN

Be the first to review this product

    • Make: Jeep
    • Model: Grand Cherokee ZJ
    • Vehicle: 1993-98 Grand Cherokee ZJ 4" lift kit, Hydro shocks
    • 2or4: 2WD, 4WD
    • Tire Size: 32x11.50, 4.5" BS
    • Upsell: ZON3400, ZONJ5150, ZONJ5451

Please wait...