2003-06 Jeep Wrangler TJ, Rubicon 4" lift kit, Bilstein shocks

Product No: K843B SL

Availability: In stock

$803.95

Important Notes

A small percentage of Jeeps with a 4" lift (except Rubicon) will require a slip yoke eliminator (SYE) kit to reduce driveshaft angle / driveline vibration. This cannot be determined until the lift is installed and the Jeep road tested.

Quick Overview

The Superlift 4" lift kit for the Jeep Wrangler TJ, Rubicon includes front and rear coil springs that are pre-set (fully compressed and stressed) to minimize settling. A pitman arm is not required. Using the stock pitman arm prevents bump steer. Included in the Superlift lift kit for your Wrangler are:

  • Pre-set front and rear coil springs
  • Longer front and rear anti-sway bar links prevent bar pre-load
  • Compression travel stop extensions for front and rear prevent over-compression
  • Tubular replacement front lower links restore caster
  • Rear track bar bracket aligns body and rear axle
  • Eccentric cam bolts and transfer case lowering kit corrects rear driveshaft angle
  • 4 Bilstein shocks
  • Lifetime Warranty and Satisfaction Guarantee

** Adjustable front and rear track bars available
** Optional front / rear anti-sway bar quick disconnects increase off-road articulation

Product Attachments

View FileK843, K816 Instructions    Size: (587.7 KB)

Superlift K843B Jeep Wrangler TJ, Rubicon lift kit

Be the first to review this product

    • Make: Jeep
    • Model: Wrangler TJ, Rubicon
    • Vehicle: 2003-06 Wrangler TJ, Rubicon & Rubicon 4" lift kit, Bilstein shocks
    • Tire Size: 33x12.50
    • Upsell: 92050 SL, 5070 SL, 5075 SL, 5080 SL, 5067 SL, 5068 SL

Please wait...