NISSAN FRONTIER, XTERRA SUSPENSION LIFT KITS

6" allows 315/70R17 tires, 17x8 wheels, 5" BS

Fabtech lift kits for Nissan Frontier.

6" Basic system features extended length steering knuckles that allow the factory upper control arms to be retained in the stock location while relocating the lower control arms. The lower arms are secured to the frame with arched crossmembers for superior ground clearance with solid 1/4" thick plate construction for unsurpassed strength. Lift is accomplished via a steel coilover shock spacer system retaining the stock ride characteristics of the vehicle. The Rack and Pinion remains in the factory location. Also included in this system is a 1/4" thick differential skid plate and Impact struts. Rear lift is accomplished with a Block and U bolt system.

NOTE: Long bed models and 2WD models require Carrier Bearing spacer kit. See Options below.

FREE shipping for complete kits to Continental US

Rough Country's 2.5" lift kit for the Nissan Frontier and Xterra includes 2.5" top front strut extensions along with 1.5" rear lifted shackles. No strut disassembly or strut compressor is required for installation. Rear shackles are constructed from heavy duty 3/8" plate steel with DOM tubed sleeves that are designed to perform offroad and stand up to the task.

Allows 285/75R-16 tires

Revtek's 2.5" Nissan Frontier lift includes machined billet aluminum spacers for the front with a 1-1/4" rear block kit. Longer shocks are not required. Complete split spacer suspension lift system allows for tire sizes up to 285/75R16 on positive offset wheel (some trimming required). Maximum recommended wheel size, 16x8 utilizing factory off-set. No trimming required on stock rims.

The 2" Nissan Xterra kit is made of OEM equipment or better for durability and strength. New shocks not required. Lift allows for 285/75 tires with max wheel size is 8" utilizing factory off-set. 

A compressor is required for installation.

The Traxda Lift Kit for the Nissan Frontier includes a unique strut spacer that incorporates a built-in bump stop to protect against contact between the upper control arm and strut assembly. Most kits on the market are quite noisy because of the contact of the control arms.

This lift is ideal for allowing up to 33" with proper wheels (always test-fit tires & wheels).

Nissan Frontier and Xterra

ReadyLift's lift kit raises the ride height 2.5” in the front and 1.5” in the rear. ReadyLift products do not require any permanent modification to factory parts and never compresses the factory springs or require cutting the strut studs. Will not affect your factory OEM ride quality or comfort level.

The ReadyLift 2.5" lift kit includes front SST strut extensions, rear spring lift shackles, camber/caster alignment bolts and control arm bump stops.

Note: Not for use on Pro-4X trucks if the goal is to achieve a level stance. Nismo and Pro 4X trucks may sit one inch higher in the front with 69-4510 kit.

265/75-16 on stock rim requires no modifications.
285/75-16 on stock rims needs minor modifications in order to fit.

FREE SHIPPING to Continental US.

Daystar Comfort Ride Suspension kits are the perfect choice for a lift that will not only increase vehicle height, but enhance performance. Improve ground clearance, allow for larger tires, utilize most of the stock components and improve the all around on & off road capabilities at an affordable price.

Allows 32" tires. Easiest way to add 20-22" wheels.

Premium Lift Systems offer an affordable lift solution. Combining Performance Accessories' body lift kit, leveling kit and gap guards, Premium Lift Systems are the most economical way to raise your vehicle between 5" to 6" allowing a 35" tire. Premium quality and appearance without the premium price tag!