RCD Suspension is pleased to announce the release of several new leveling shock applications in addition to previously offered units. The growing use of “strut” type front ends, and the demand for leveling kits is on the rise.  RCD Suspension has worked closely with Bilstein Shock Absorbers to develop performance applications to fulfill the need, all at very competitive pricing compared to spacer kits.

Anyone can make a spacer kit, and yes they are economical, but they add no performance to the application.  RCD Suspension has taken the top applications, studied the vehicle platforms, and produced applications that maximize the usable travel of the vehicle’s suspension system. By increasing the available travel and maximizing shock length, we are able to add “droop travel” to the system, thus increasing ride quality. In addition, spring preload is enhanced, increasing rate, and improving the handling and performance, getting rid of the stock mushy feel. 

With the increase in travel, spring rate, and CG, comes the need for better shock valving, something no others do better than Bilstein. Each application is custom tuned and the result is vastly improved handling, performance, and the improved stance you want from a leveling kit.  

The front struts utilize the factory coils and have multiple snap ring grooves to adjust the ride height to stock, 1.25” or up to 2”. The rear shocks are stock length and both front and rear units are zinc /silver finished.

Advantages:

• Better than OEM mounting hardware, direct fit applications, easy installation and long life. 
• Maximized wheel travel through improved shock length and stroke.
• Improved performance through better spring rates and shock valving.
• Strut applications utilize multiple snap ring grooves allowing fine tuning of ride height and spring preload for various chassis combinations.
• Traditional Bilstein Quality and Performance.
• Use the front replacement struts on lift kits using spacers to replace those stock shocks and add performance.
• Extended length units are also available for most manufacturers 4” – 6” late model suspension platforms.
• Limited Lifetime Warranty

Revtek's 2.5" Frontier lift includes machined billet aluminum spacers for the front with a rear block kit. Longer shocks are not required. Easy installation. complete split spacer suspension lift system allows for tire sizes up to 285/75R16 on positive offset wheel. Maximum recommended wheel size, 16x8 utilizing factory off-set.

The 2" Xterra kit is made of OEM equipment or better for durability and strength. New shocks not required. Lift allows for 285/75 tires with max wheel size is 8" utilizing factory off-set. 

Frontier with Revtek 2.5" lift kit with 285/75R16 tires mounted
 on aftermarket wheels (some trimming required). 
No trimming required on stock rims.

835 kit

Rough Country's Titan  3" Leveling Kit includes front strut extensions. Allows 33x12.50 tires.

The Frontier 2.5" Leveling Kit Front strut extensions allow 265/75's.

Tuff Country leveling kit that lifts the front of the Titan 1.5" to be level with the rear. Designed to install above the factory struts and maintain a factory ride. Factory front struts can be retained.

Strut spacers

Level-It lift systems are the perfect solution for anyone wanting an economical and easy way to eliminate the factory nose-down rake on virtually all late-model trucks and SUVs. Whether it’s simply leveling the truck’s stance, making the room to go up a couple of tire sizes, or plus-sizing the tire and wheel package on the vehicle, Level-It components work with factory suspension components to achieve modest ride height gains without a lot of hassle.

Level It Strut Extensions

• Mounts on top of the factory strut assembly

• Allows the use of plus-size wheels / tires

• Easy installation and removal – no strut disassembly required

• Ideal for restoring height lost from heavy front bumper / winch combos

• Enhances appearance by leveling the stance of the vehicle

• 10.9 grade metric hardware included

Level It Strut Extensions

Rancho Quick Lift Shocks

QuickLift is an easy-to-install solution that raises the front suspension and improves ride. Adding QuickLift provides an aggressive vehicle stance and offers the option of adding larger tire/wheel packages of up to 35". Designed with Rancho's MyRide 9-position ride tuner, QuickLift features a liquid metallic finish and is covered by Rancho's limited lifetime warranty. Match your QuickLift in the rear with Rancho's new RS9000XL shocks to create the ultimate in ride, performance and appearance.

• Lift Height 1" to 2.5" versus stock height
• Install time 1-2 hours (same as typical replacement shocks)
• Re-use OE spring
• Protective boot included

Daystar Comfort Ride Suspension kits are the perfect choice for a lift that will not only increase vehicle height, but enhance performance. Improve ground clearance, allow for larger tires, utilize most of the stock components and improve the all around on & off road capabilities at an affordable price.

Strut Spacer
Available in black only

Lift

Part #

Lift

Part #