For a Baja look on your Toyota Tundra or Sequoia, install the Traxda solid steel 3" front spacers and leave the rear stock. The rear will sit slightly higher than the front. Every effort was made to be sure the Toyota reliability and quality are not compromised. Traxda made sure to offset the top and bottom plates before they sandwiched the tubing and created the new strut cap to ensure proper spring clearance. To protect your CV joints on 4x4 models, a differential drop is included. To prevent the shock from using the internal bump stop, a bump stop drop is included. This allows the bump stop on the frame to do the job it was designed to do. This kit installs in 2 to 3 hours and does not change preload so the stock ride is maintained. No disassembly of the strut is required. No after installation maintenance is required. A 1" rear block kit is available and sold separately.
View kit installation instructions