Vehicles with 4 cyl engines or soft tops will sit a little higher due to weight difference. SIP275 may be required on hard top models to level the rear. Non-Rubicon models require slip yoke eliminator RR231 and replacement CV driveshaft. Automatic transmission models must remove front skid plate for driveshaft clearance. Modifications to the factory exhaust cross-over pipe will be necessary. 6-speed models may require additional modification. Contact Skyjacker for more information.
The 6" Rock Ready Long Arm lift kit for the Jeep Wrangler TJ, Rubicon by Skyjacker includes front & rear coil springs, front adjustable track bar, rear track bar relocation bracket, driver and passenger frame brackets, NP231 transfer case shifter bracket, front & rear stainless steel braided brake lines, rear shock relocation brackets, front sway bar double disconnects & rear sway bar end links, skid plate brackets, power steering pitman arm, steering box skid plate, OEM stabilizer cylinder. This kit also includes front & rear bent adjustable upper and lower single-flex control arms fitted with the Skyjacker massive 1.25" Teflon-Kevlar lines, self-lubricating rod ends at the axle. Soaking up the energy at the frame are greasable polyurethane bushing ends. Shocks sold separately.