Zone Offroad D10 Dodge Ram 2500, 3500, 1500 Mega Cab lift kit

Be the first to review this product

2008 4WD Dodge Ram 2500, 3500, 1500 Mega Cab 5" lift kit, 3-7/8" axle, Hydro shocks,

Product No: D10 ZN

Availability: In stock

FREE SHIPPING Lower 48 States

Important Notes

If a carrier bearing exists in the rear driveshaft, a carrier bearing drop kit may be required. Power Wagon models came factory with a 2" taller ride height so the net lift gain will be 3" over the factory. Power Wagon models require sway bar link kit ZOND5301.

The pitman arm included in this lift kit works on 2003-08 models with the factory steering box. If your steering box has been upgraded, this pitman arm will not fit and you should order the 2009 model pitman arm sold separately. To determine this, measure the sector shaft spline. The 2003-08 model will measure 1-1/4". The upgrade will measure 1-1/2".

Quick Overview

The Zone Offroad 5" front system features greasable tubular upper and lower control arms. These will properly locate and rotate the front axle to ensure alignment and long term performance. The dropped pitman arm combined with the heavy duty track bar bracket ensures factory steering geometry. Whether on road or offroad this system is built to perform. The kit also includes extended lengh urethane bump stops and custom valved Zone Hydro shocks that have been tuned to the coils springs thus ensuring not only performance for your Dodge Ram 2500, 3500, 1500 Mega Cab but great ride quality. A 3" rear block kit lifts the rear.

View kit installation instructions

    • Make: Dodge
    • Model: 2500
    • Vehicle: 2008 Ram 2500 5" lift kit, 3-7/8" axle, Hydro shocks
    • 2or4: 4WD
    • Tire Size: 37x12.50 on 17x9 rims, 5" BS
    • Upsell: ZON3200, ZOND5505, ZOND8404, ZOND5301


Zone Offroad lift kit fits the following models:
2008 Ram 1500 Mega Cab
2008 Ram 2500
2008 Ram 3500

Please wait...