Zone Offroad D36 Dodge Ram 2500, 3500, Mega Cab lift kit

Be the first to review this product

2009-13 4WD Dodge Ram 2500, 3500, Mega Cab 8" lift kit, Hydro shocks

Product No: D36 ZN

Availability: In stock

FREE SHIPPING Lower 48 States

Important Notes

If a carrier bearing exists in the rear driveshaft, a carrier bearing drop kit may be required. Power Wagon models came factory with a 2" taller ride height so the net lift gain will be 4" over the factory. Power Wagon models require sway bar link kit ZOND5301.

Quick Overview

The 8" lift kit for the Dodge Ram 2500, 3500, Mega Cab by Zone Offroad uses a unique control arm relocation design. By relocating the stock upper and lower arms, angles are relieved properly positioning the front axle and providing good caster and front pinion angle settings. The brackets are constructed of 1/4" steel and mount directly to stock locations. Drilling of a few new holes will be required for the extra suport. No cutting of the frame or axle mounts is required. Stock alignment adjustabilisy is retained. The stock control arm angles are maintained to provide a great ride, handling and control. Additionally included are front coil springs, dropped pitman arm, track bar relocation, sway bar relocation, bump stops and 4 Hydro shocks. Shock boots sold separately. The rear lift utilizes a block kit with u-bolts.

Covered by the 560plus Factory Protection Plus Program for vehicles less than 5 years old from the date of manufacture and the mileage is less than 60,000 miles. Click here for details.

View kit installation instructions

Required and/or Related Items

    • Make: Dodge
    • Model: 3500
    • Vehicle: 2009-12 Ram 3500 8" lift kit, Hydro shocks
    • 2or4: 4WD
    • Tire Size: 38x13.50 on 17x9 rims, 4.5"-5" BS
    • Upsell: ZON3201, ZOND5505


Zone Offroad lift kit fits following models:
2009 Ram 2500, 3500, Mega Cab
2010 Ram 2500, 3500, Mega Cab
2011 Ram 2500, 3500, Mega Cab
2012 Ram 2500, 3500, Mega Cab
2013 Ram 2500, Mega Cab

Please wait...