Superlift K843 Jeep Wrangler TJ, Rubicon lift kit

Be the first to review this product

2003-06 Jeep Wrangler TJ, Rubicon 4" lift kit, Superide shocks

Product No: K843 SL

Availability: In stock


Important Notes

A small percentage of Jeeps with a 4" lift (except Rubicon) will require a slip yoke eliminator (SYE) kit to reduce driveshaft angle / driveline vibration. This cannot be determined until the lift is installed and the Jeep road tested.

Quick Overview

The Superlift 4" lift kit for the Jeep Wrangler TJ, Rubicon includes front and rear coil springs that are pre-set (fully compressed and stressed) to minimize settling. A pitman arm is not required. Using the stock pitman arm prevents bump steer. Included in the Superlift lift kit for your Wrangler are:

  • Pre-set front and rear coil springs
  • Longer front and rear anti-sway bar links prevent bar pre-load
  • Compression travel stop extensions for front and rear prevent over-compression
  • Tubular replacement front lower links restore caster
  • Rear track bar bracket aligns body and rear axle
  • Eccentric cam bolts and transfer case lowering kit corrects rear driveshaft angle
  • 4 Superide shocks
  • Lifetime Warranty and Satisfaction Guarantee

** Adjustable front and rear track bars available
** Optional front / rear anti-sway bar quick disconnects increase off-road articulation

View kit installation instructions

    • Make: Jeep
    • Model: Wrangler TJ, Rubicon
    • Vehicle: 2003-06 Wrangler TJ, Rubicon 4" lift kit, Superide shocks
    • Tire Size: 33x12.50
    • Upsell: 92050 SL, 5070 SL, 5075 SL, 5080 SL, 5067 SL, 5068 SL


Superlift lift kit fits the following models:
2003 Jeep Wrangler TJ, Rubicon
2004 Jeep Wrangler TJ, Rubicon
2005 Jeep Wrangler TJ, Rubicon
2006 Jeep Wrangler TJ, Rubicon

Please wait...