Zone Offroad J16 Jeep Grand Cherokee lift kit

Be the first to review this product

1993-98 Jeep Grand Cherokee ZJ 4" lift kit, Hydro shocks

Product No: J16 ZN

Availability: In stock

FREE SHIPPING Lower 48 States

Important Notes

* Measure front driveshaft prior to installation. Over 24.5" does not require modification. 20"-24" may require a change to spicer type joint if vibration occurs. If less than 20", a spicer type joint is required and vibration may persist.
* If equipped with a CV stype front driveshaft mount at the pinion, then a new spicer type u-joint is required to eliminate vibration.
* Vehicles with V8 may not achieve stated lift height. Front 3/4" coil spacer is a common addition to accommodate the additional engine weight.

Quick Overview

This 4" lift kit by Zone Offroad for the Jeep Grand Cherokee ZJ provides dramatic improvement in both ground clearance and wheel travel. Massive lower control arms are greasable and made from 1-3/4" x 1/4" wall DOM tubing to correct front alignment and improve suspension control. Front and rear coil spring, transfer case drop, rear pinion cams that rotate the rear pinion, front extended sway bar links with urethane bushings, rear track bar brackets to center the axle, 3" bump stop extensions and 4 Nitro shocks specifically valved for this application are also included.

View kit installation instructions

Zone Offroad  Grand Cherokee ZJ

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Please wait...