2019-23 4WD Ford Ranger (w/out Intrusion Beam) 3.5" Ball Joint UCA lift kit, Performance shocks

Fabtech has developed a 3.5" suspension lift kit for the Ford Ranger that bolts on to provide the additional lift needed to install a set of slightly larger tires. This lift kit features heavy duty ball joints to eliminate binding during extended suspension travel. The tubular upper control arms are designed to correct suspension geometry to ensure proper alignment after installation. The proper CV angle and plunge were factored into the design to eliminate the need to reposition the front differential. The additional wheel travel provides improved off-road performance with no suspension bind at full droop. Steel spacers are used for front lift and utilize the factory coilover shocks to maintain a stock-like ride. A 1.5" rear block kit lifts the rear to level your Ranger. A set of rear Fabtech Performance shocks completes this package. 

Kit Components
Tubular upper control arms
1.5" block and u bolt kit
Steel coilover spacers
Performance series rear shocks

Kit Features
Value priced system with Fabtech quality
Increased ground clearance
Tubular UCA design with urethane bushings for quiet ride
Extended range upper ball joints allow for increased travel
Suspension can be restored to stock
Easy bolt on installation

275/65R17 tires w/ 18x9 wheels w/ 5" BS w/ minor trimming
265/70R17 tires w/ Factory Wheels w/ minor trimming
255/75R17 tires w/ Factory Wheels w/ minor trimming
265/65R18 tires w/ Factory Wheels w/ minor trimming
285/55R20 tires w/ 20x9 wheels w/ 5" BS w/ minor trimming

This Fabtech lift kit is covered by their FIVE SIXTY Powertrain Warranty. See Details