2007-18 Jeep Wrangler JK 4-Door 3" Trail II lift kit, Stealth Monotube shocks

Fabtech's 3" Trail II Short Arm lift kit for the 2 door Jeep Wrangler JK features heavy duty front and rear lower link arms along with an adjustable front track bar. This system will improve performance over rocks and trails without compromising your daily ride quality. The link arms are constructed using .250" thick wall tubing with factory parallel joint angles to reduce wear on the bushings. They are guaranteed not to bend! Included are 5 Ton joints warrantied to never wear out.

The included standard coil springs are made in America and are designed to increase travel and articulation compared to the stock springs. This single rate design provides the same load carrying capacity as factory. They are vehicle specific to insure a consistent ride height by being "preset" during the manufacturing process. After installation, you'll discover increased offroad capabilities and be provided a good highway ride.

The Fabtech Stealth Monotube shocks are designed with a free floating piston that separates the nitrogen gas charge from the oil to reduce shock fade in offroad conditions. The "Nitrocarb" piston rods have a matte black finish for a complete black-out package. This signature shock features an identifiable raised metal nameplate and provides a superior ride at an affordable price.

• Lower short arm links Front & Rear
• Standard Coil Springs Front & Rear
• 1.75”-5” Chromoly adjustable front track bar
• Rear Track Bar Bracket & Support
• Sway Bar Links Front
• Pitman Arm
• Front and rear stainless steel brake lines
• E Brake Bracket
• Bump Stop Extension Front
• Bump Stop Brackets Rear
• 4 Stealth Monotube shocks

With stock fenders:
Use 35/12.50R17 tire w/ 17x8 wheels w/ 5” BS w/ minor trimming
Use 35/12.50R18 tire w/ 18x9 wheels w/ 5” BS w/ minor trimming
Use 295/70R18 tire w/ 18x9 wheels w/ 5” BS w/ minor trimming
Use 35/12.50R20 tire w/ 20x9 wheels w/ 5” BS w/ minor trimming
Use 295/70R20 tire w/ 20x9 wheels w/ 5” BS w/ minor trimming

With tube fenders:
Use 37/12.50R17 tire W/ 17X9 wheels w/ 4.5” BS w/ cutting
Use 37/12.50R18 tire W/ 18X9 wheels w/ 4.5” BS w/ cutting
Use 37/12.50R20 tire W/ 20X9 wheels w/ 5” BS w/ cutting



This Fabtech lift kit is covered by their FIVE SIXTY Powertrain Warranty. See Details

View short arm link installation instructions
View coil spring installation instructions
View front track bar installation instructions
View kit installation instructions