2000-02 Dodge Ram 2500 V10, Diesel 5" lift kit, N3 Nitro shocks
$949.95
Product No
35330-HK
FREE SHIPPING Lower 48 States
Important Notes
* Will not fit V8 gas models or dually.
* Requires cutting and drilling.
* Models equipped with factory overload springs will need to have the overload removed for the new block and u-bolt kit
* On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration. Depending on the severity, this can be corrected with shimming down the carrier bearing.
* Requires cutting and drilling.
* Models equipped with factory overload springs will need to have the overload removed for the new block and u-bolt kit
* On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration. Depending on the severity, this can be corrected with shimming down the carrier bearing.
Quick Overview
Rough Country offers a 5" control arm drop bracket lift kit for your Ram 2500 to improve driveline geometry. The heavy duty drop brackets eliminate the steep mounting angle found in some kits. The drop brackets mount the stock arms at a reduced angle to gain better ride quality and caster angle to improve driving.
- Lifted coil springs
- Lower control arm drop brackets
- Pitman arm
- Track bar drop bracket
- Sway-bar drop brackets
- 4" fabricated rear lift block kit
- Add-a-leafs
- Four N3 Nitro shocks
- Make: Dodge
- Model: 2500
- Vehicle: 2000-02 Ram 2500 V10, Diesel 5" lift kit, N3 Nitro shocks
- Drive: 4WD
- Tire Size: 35x12.50 on 17"-20" factory rims
Rough Country lift kit fits the following models:
2000 Ram 2500
2001 Ram 2500
2002 Ram 2500
2000 Ram 2500
2001 Ram 2500
2002 Ram 2500