2013-15 4WD Dodge Ram 3500 5" radius arm lift kit, N3 Nitro shocks
$1,199.95
Product No
369-20-HK
FREE SHIPPING Lower 48 States
Important Notes
Will not fit Dually or Power Wagon models.
On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take-off vibration. Depending on the severity, this can be corrected with shimming down the carrier bearing.
On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take-off vibration. Depending on the severity, this can be corrected with shimming down the carrier bearing.
Quick Overview
Rough Country has designed their 5" lift kit for the new Dodge Ram 3500 with the intention of maintaining the impressive factory specs and stepping up performance and durability. This results in an aggressive looking beast with a lush ride quality to make you the envy of all Dodge owners.
To achieve the look and retain the ride quality, maintaining the factory suspension geometry as close to factory angles as possible is the key. This Rough Country lift kit features ultra-durable radius arms that precisely fit directly into the factory mounts not only for ease of installation but to maintain a more factory-like angle. Clevite rubber bushings are used to maximum the absorption of any vibrations.
The progressive rate coil springs are retained to maintain the ride quality of the Ram trucks. Coil spacers provide front lift. Track bar bracket, sway bar components, pitman arm and all other necessary hardware are included along with four N3 Nitro shocks specifically valved for this application.
Increased ground clearance
Maintains factory progressive rate coil springs
Track bar bracket keeps the front axle properly centered.
Pitman arm
Front sway bar brackets; rear sway bar links
Four N3 Nitro series shock absorbers
View lift kit installation instructions
To achieve the look and retain the ride quality, maintaining the factory suspension geometry as close to factory angles as possible is the key. This Rough Country lift kit features ultra-durable radius arms that precisely fit directly into the factory mounts not only for ease of installation but to maintain a more factory-like angle. Clevite rubber bushings are used to maximum the absorption of any vibrations.
The progressive rate coil springs are retained to maintain the ride quality of the Ram trucks. Coil spacers provide front lift. Track bar bracket, sway bar components, pitman arm and all other necessary hardware are included along with four N3 Nitro shocks specifically valved for this application.
Increased ground clearance
Maintains factory progressive rate coil springs
Track bar bracket keeps the front axle properly centered.
Pitman arm
Front sway bar brackets; rear sway bar links
Four N3 Nitro series shock absorbers
View lift kit installation instructions
Required and/or Related Items
-
$144.95
- Make: Dodge
- Model: Ram 3500
- Vehicle: 2013-15 Ram 3500 5" radius arm lift kit, N3 Nitro shocks
- Drive: 4WD
- Tire Size: 37x12.50 with 5" BS
- Upsell: 8749430 HK
Rough Country 5" lift kit fits the following models:
2013 Ram 3500
2014 Ram 3500
2015 Ram 3500
2013 Ram 3500
2014 Ram 3500
2015 Ram 3500
We found other products you might like!
