2019-23 2&4WD GMC Sierra Denali 1500 with Factory Adaptive Ride Control 3" Uniball UCA lift kit

The Fabtech Uniball upper control arm lift kit for the Sierra Denali 1500 with factory adaptive ride control increases ride height 3.5" over stock without creating suspension bind at full droop. These control arms use .120” wall 1.50” OD 4130 Chromoly tubing. In place of ball joints high quality 1” FK Stainless PTFE lined Uniball bearings are used. The finest material used in these Uniball control arms will provide increased longevity when experiencing rugged offroad conditions as well as a more positive street ride. The stock ride is maintained by using steel spacers that retain the factory coilover shocks along with a rear block kit and the factory Adaptive Ride Control shocks

Kit Components
Strut Spacers
Adaptive Ride Control Spacers
Upper Control Arms
Rear Block Kit

Kit Features
Increased ground clearance
Uniball Upper Control Arms
Increased fender clearance compared to a Leveling Kit for 33” tall tires
Suspension can be restored to stock
Easy installation

Tire/Wheel Combos
33/12.50R18 Wheel Size – 18×9 w/ 5″ BS w/minor trimming
295/65R18 Wheel Size – 18×9 w/ 5″ BS w/minor trimming
33/12.50R20 Wheel Size – 20×9 w/ 5″ BS w/minor trimming
295/55R20 Wheel Size – 20×9 w/ 5″ BS w/minor trimming
This Fabtech lift kit is covered by their FIVE SIXTY Powertrain Warranty. See Details