2009-18 4WD Ram 1500 0-2.5" Stage 4 Coilover UCA lift kit, VS 2.0 Aluminum Reservoir shocks

If you're serious about your driving and want maximum performance whether on the highway or in the dirt, install the ICON Stage 4 Coilover lift kit with Upper Control Arms on your Ram 1500. This system was designed with the primary focus on increased wheel travel and damping capability. This translates into both on and off-road outstanding control and ride quality.

Features include 2.5 Coilover shocks that have an internal reservoir and ICON-engineered Eibach coil springs. This combination gives you superior vehicle "feel" all through the range of travel. The coilovers are easily adjustable from 0" up to 3" to allow for larger wheel and tire combinations. Along with the upper control arms, rear 1.5" rear dual rate coil springs and 2.0 Aluminum monotube rear reservoir shocks, your Ram 1500 will have balanced performance from front to rear.

When using the ICON coilover shocks, the weak OEM ball joints present the problem of limiting suspension travel. ICON upper control arms use 1" PTFE lined Uniballs that are combined with 17-4 stainless taper pin adapters to increase the upper arm misalignment. This allows for smooth and clean wheel travel without being concerned with factory ball joint bind.

The vehicle specific (VS) 2.0 reservoir shocks are 100% rebuildable and revalvable. This high quality upgrade will improve ordinary street driving and weekend warriors will discover improved off-road performance. The piggyback and remote reservoir shocks feature the unique use of a 6061 billet aluminum manifold below the top cap of the shock to create an internal bump zone to provide an additional 20% of damping force.

• Increased wheel travel and ride quality over stock with no change in towing capacity
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Adjustable coilovers from 0-3" of lift height
• Dual rate 1.5" rear coil springs
• Rear VS 2.0 Aluminum Reservoir Shocks
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated coilover shock body with 7/8 shaft
• High strength alloy CNC machined lower bar pin
• FK rod end bearings for extended longevity and minimal deflection
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Made in the USA