2008-10 4WD Ford F250, F350 Super Duty 4-5.5" Stage 1 Reservoir Coilover Conversion, VS 2.0 Aluminum Reservoir shocks

$4,177.60
Product No
K63121
FREE SHIPPING Lower 48 States

Important Notes

* Link to Important Technical Notes for ICON Double Adjuster
* Springs are rated for Diesel engines only. Gas engine models will realize slightly more lift.
* Removal of the coil centering cup in factory coil bucket is required for installation.
* Will not work on models with manual transmission.
* Pinch weld on 2005-10 Super Duty radius arms may come in contact with radius arm drop bracket hardware.
* 2008-16 models with gas engines may need exhaust modified to clear front driveshaft.
* Models with a 2-piece rear drive shaft should order carrier bearing shim kit.

Quick Overview

Add a new level of performance to your Ford F250 of F350, by installing the ICON 4-5.5" Remote Reservoir Coilover Conversion lift kit. ICON has designed this kit for the purpose of increasing the overall damping ability with an adjustable ride height from 4" up to 5.5". These coilovers are based on the ICON series shocks and feature Eibach coil springs and FK rod end bearings. They are valved specifically for your truck using machined components with a fully serviceable design so they can be rebuilt or revalved as needed. Whether you spend all your time on the pavement or in the dirt, you can rest assured you have the best suspension solution on the market.

This lift kit also features rear 2.0 Aluminum Series shocks along with radius arm drop brackets, sway bar drops, brake line brackets, bump stops, an adjustable track bar with bearing rod end and a 5" rear block kit.

The vehicle specific (VS) shocks are specifically designed for each application. They are 100% rebuildable and revalvable. This high quality upgrade will improve ordinary street driving and weekend warriors will discover improved off-road performance. These ICON shocks operate over a wide temperature range and are designed with a nitrogen charged monotube remote reservoir with chrome plated hardened steel shaft with 6061 aluminum rod end, top cap and internals ensure strength and durability. Poly bushings, zinc plated sleeves for factory fitment. The 6063 anodized aluminum body provides superb heat dissipation, excellent corrosion resistance and a high-tech appearance. The rubber top out bumper allows noise free operation.

  • Bolt-in system fits in OE coil bucket location
  • Ride height adjustable coilovers (4-5.5")
  • Increased wheel travel and ride quality over stock
  • Decreased body roll and improved on and off-road ride dynamics
  • Vehicle-specific shock valving provides unparalleled ride quality and control
  • Coilover conversion allows for addition of secondary shock
  • Corrosion resistant CAD plated coilover shock body with 7/8" shaft
  • Eibach coil springs guaranteed for life against sagging or breakage
  • FK Rod End bearings for extended longevity and minimal deflection
  • Made in the USA

Required and/or Related Items

    • Make: Ford
    • Model: F250
    • Vehicle: 2008-10 F250 4-5.5" Stage 1 Reservoir Coilover Conversion, VS 2.0 Aluminum Reservoir shocks
    • Drive: 4WD
    • Tire Size: 35x12.50 on 8.5-9" wide wheel, 5" BS
    • Upsell: ICO33700
    • Initialize: 1
ICON lift kit fits following models:
2008 F250 Super Duty
2009 F250 Super Duty
2010 F250 Super Duty

2008 F350 Super Duty
2009 F350 Super Duty
2010 F350 Super Duty

We found other products you might like!
© 2024 Rocky Mountain Suspension. All Rights Reserved.  |  Privacy Policy.  |  Website by Bennett Web Group