2019-20 4WD Ford F450, F550 10-Lug 6" Radius Arm lift kit, Dirt Logic 4.0 Resi Coilovers, Dirt Logic 2.25 shocks
$5,337.72
Product No
K2336DL-FT
FREE SHIPPING Lower 48 States
Important Notes
* Some models may not sit level after install.
* Fits both gas and diesel models.
* Fits both Dually and Single Rear Wheel models.
* Front driveshaft modification is required or order driveshaft FTS92035
* Fits both gas and diesel models.
* Fits both Dually and Single Rear Wheel models.
* Front driveshaft modification is required or order driveshaft FTS92035
Quick Overview
The Ford F450 and F550 10-lug trucks demand specialty parts when modifying the suspension. Fabtech has designed 6" lift kit components robust enough to provide the necessary additional strength needed when running oversized tires. Ten years of experience providing commercial and military applications makes Fabtech the right choice for these large trucks.
The Dirt Logic 4.0 Coilovers are bolted in with simple, super stout 1/4" thick steel brackets that utilize the factory coil bucket. These have a massive 4" diameter stainless steel body with 1.25 NitroSteel piston rod to handle the most aggressive driving conditions. American made coil springs are designed to handle the weight of the F450 and F550 while providing a superior ride quality. When driving at high speeds over extreme terrain the remote aluminum reservoir will dissipate heat for continuous damping.
The replacement tubular radius arms are constructed with dimple die side plate for superior strength. The offset design allows full turning radius with wide tires. These radius harms have 1 degree of caster built in to accommodate the increased ride height. An additional 1.5-2 degrees of caster adjustment is available with the alignment cams on the arms. The radius arms also feature the Fabtech 5 Ton Joint on the pivot side at the frame. For over 10 years, these joints have been proven in rugged military use. They are both quiet and strong!
The factory long travel steering stabilizer is retained with the use of a bracket and support brace to reduce tire shimmy. Dirt Logic shock bodies have high grade 304 Stainless Steel construction for maximum resistance to corrosion. A finely detailed machine finish to the shock body provides a stunning appearance. The piston rod is a NitroSteel® material for superior corrosion resistance over chromed piston rods. These are the best designed and performing take apart shocks you can buy and will outlast any other take apart shock on the market
37/12.50 tires on 17-18X9 rims with 4 3/4" BS with minor trimming
37/13.50 tires on 20X9 rims with 5" BS with minor trimming
This Fabtech lift kit is covered by their FIVE SIXTY Powertrain Warranty. See Details
View kit installation instructions
The Dirt Logic 4.0 Coilovers are bolted in with simple, super stout 1/4" thick steel brackets that utilize the factory coil bucket. These have a massive 4" diameter stainless steel body with 1.25 NitroSteel piston rod to handle the most aggressive driving conditions. American made coil springs are designed to handle the weight of the F450 and F550 while providing a superior ride quality. When driving at high speeds over extreme terrain the remote aluminum reservoir will dissipate heat for continuous damping.
The replacement tubular radius arms are constructed with dimple die side plate for superior strength. The offset design allows full turning radius with wide tires. These radius harms have 1 degree of caster built in to accommodate the increased ride height. An additional 1.5-2 degrees of caster adjustment is available with the alignment cams on the arms. The radius arms also feature the Fabtech 5 Ton Joint on the pivot side at the frame. For over 10 years, these joints have been proven in rugged military use. They are both quiet and strong!
The factory long travel steering stabilizer is retained with the use of a bracket and support brace to reduce tire shimmy. Dirt Logic shock bodies have high grade 304 Stainless Steel construction for maximum resistance to corrosion. A finely detailed machine finish to the shock body provides a stunning appearance. The piston rod is a NitroSteel® material for superior corrosion resistance over chromed piston rods. These are the best designed and performing take apart shocks you can buy and will outlast any other take apart shock on the market
- Replacement radius arms
- Dirt Logic 4.0 Coilovers
- 1/4" thick steel track bar bracket
- Pitman arm
- Front and rear bump stop brackets
- 1/4" thick steel sway bar brackets
- Brake line brackets
- Steering stabilizer brackets
- Carrier bearing kit
- Rear block kit
- Dirt Logic 2.25 shocks
37/12.50 tires on 17-18X9 rims with 4 3/4" BS with minor trimming
37/13.50 tires on 20X9 rims with 5" BS with minor trimming
This Fabtech lift kit is covered by their FIVE SIXTY Powertrain Warranty. See Details
View kit installation instructions
Required and/or Related Items
-
$800.38
-
$828.26
-
$896.11
- Make: Ford
- Model: F450, F550
- Vehicle: 2019-20 F450, F550 10-Lug 6" Radius Arm lift kit, Dirt Logic 4.0 Resi Coilovers, Dirt Logic 2.25 shocks
- Drive: 4WD
- Upsell: FTS22313 FT, FTS22314 FT, FTS92035 FT
Fabtech 6" lift kit fits following models:
2019 Ford F450 Super Duty
2020 Ford F450 Super Duty
2019 Ford F550 Super Duty
2020 Ford F550 Super Duty
We found other products you might like!
