Traxda 202040 Ridgeline lift kit

Be the first to review this product

2017-18 AWD Honda Ridgeline 2" lift kit with sway bar links

Product No: 202040 TX

Availability: In stock

FREE SHIPPING Lower 48 States

Quick Overview

Traxda has developed a lift kit for the Honda Ridgeline that improves the installation process and deals with the changes to the front suspension. This new model does not have a built in camber adjustment plus the control arm must be moved down 3 inches for installation. But Traxda has the solution!

The strut spacer is designed with 2 degrees (+1/-1) of camber adjustment to overcome this problem. This design also makes installation easier.

The rear strut has been changed from a symmetrical to an asymmetrical design. There is a right and left version of the strut to contend with. This new design will fit all three variants of rear strut found in the Ridgeline. Another innovation contained in this lift kit is a split cap design that saves at least an hour off rear installation plus the strut does not come out of the vehicle to lift the rear.

On this new Ridgeline model, the front axles may contact the bolts holding the lower control arm in place. There is a spacer included to resolve this issue as well. Shorter sway bar links are included to prevent the sway bar from contacting the frame at full extension.

• Designed to retain the stock ride quality
• Aftermarket shocks are NOT required
• Alignment specs included, CAMBER adjustment built in to Traxda kit!

View kit installation instructions
    • Make: Honda
    • Model: Ridgeline
    • Vehicle: 2017-18 Ridgeline 2" lift kit with sway bar links
    • 2or4: AWD
    • Tire Size: 30.5" on stock rims


Traxda lift kit fits the following models:
2017 Honda Ridgeline

Please wait...